BS standards cable - Caledonian Cables

BS cable standard code Name BIP - Telecommunication cabling and equipment installations - A Guide to requirements and responsibilities BS - Electric cables - Accessories - Bitumen-based filling compounds BS 196- Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts BS Pts.1 & 2- Specification for radio-frequency cables. General requirements and tests. British Government Services requirements BS - Specification for straight concrete and clayware cable covers BS - Specification for cable boxes for transformers and reactors BS 2E 21- Pren type electric cables for aircraft BS 2G 180- Specification for permanent splicing of aircraft electrical cables BS 2G 215-1- Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft - Specification for conductors BS 2G 215-2- Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft - Specification for terminations BS 2G 221- Specification for Minyvin type electric cables (metric units) BS 2G 223- Specification for screen terminating devices for aircraft electric cables BS 2G 232- Specification for electric cables for general airframe or equipment interconnect use (135 °C), wrapped insulation BS 2G 238- Specification for electric cables for general airframe or equipment interconnect use (260 °C), nickel plated copper and copper alloy conductors, with wrapped insulation BS - Specification for 1.9/3.3 kV, 300 A bolted flameproof cable couplers and adaptors (including 380/660 V and 640/ V, 300 A adaptors) for use in coal mines BS - Specification for binding and identification sleeves for use on electric cables and wires BS - Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines BS - Specification for wrought aluminium for electrical purposes - Solid conductors for insulated cables BS 3G 197- Specification for stud-type terminal blocks for terminations on aircraft electric cables BS 3G 198-2- Sleeves for aircraft electric cables and equipment wires - Specification for slip-on sleeves for identification purposes BS 3G 198-4- Sleeves for aircraft electric cables and equipment wires - Specification for fluoropolymer heat shrinkable sleeving for binding and insulation BS 3G 210- Specification for PTFE insulated equipment wires and cables, single- and multi-core, with silver plated copper conductors (190 °C) or nickel plated copper conductors (260 °C) BS 3G 231- Specification for conductors for general-purpose aircraft electrical cables and aerospace applications BS 3G 233- Specification for electric cables for general airframe or equipment interconnect use (135 °C), extruded insulation BS -1- Specification for 600/ V single-phase split concentric electric cables - Cables having PVC insulation BS -2- Specification for 600/ V single-phase split concentric electric cables - Cables having thermosetting insulation BS -3- Specification for 600/ V single-phase split concentric electric cables - Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire BS -2- Specification for performance of mechanical and compression joints in electric cable and wire connectors - Compression joints in nickel, iron and plated copper conductors BS -1- Cable trunking - Steel surface trunking BS -2- Cable trunking - Steel underfloor (duct) trunking BS -4- Cable trunking - Specification for cable trunking made of insulating material BS Pt.2 Group 08- Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Electric cable terminology BS -2 Group 08- Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms - Terms particular to power engineering - Electric cables BS -3.30- Intruder alarm systems - Specifications for components - Specification for PVC insulated cables for interconnecting wiring BS -1- Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - General requirements and tests BS -2- Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Equipment wires with solid or stranded conductors, unscreened, single BS -3- Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Cables and equipment wires, with solid or stranded conductors, screened, single BS -4- Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Equipment wires with solid or stranded conductors, unscreened, in pairs, triples, quads and quintuples BS -5- Specification for L.F. cables and wires with PVC insulation and PVC sheath for telecommunication - Cables with solid or stranded conductors, screened and sheathed, one pair BS -30- International thermocouple reference tables - Extension and compensating cables - Tolerances and identification system BS 4G 178-2- Crimped joints for aircraft electrical cables and wires - Specification for control of crimping (including user control tests) BS 4G 198-1- Sleeves for aircraft electric cables and equipment wires - Specification for elastomeric sleeves for binding and identification BS 4G 198-3- Sleeves and moulded components for aircraft electric cables and equipment wires - Specification for heat-shrinkable sleeving for binding, insulation, and identification BS - Electric cables - Voltage levels for spark testing BS -1- Instrumentation cables - Specification for polyethylene insulated cables BS -2- Instrumentation cables - Specification for PVC insulated cables BS - Specification for dimensions of cable terminations for multi-core extruded solid dielectric insulated distribution cables of rated voltages 600/ V and / V having copper or aluminium conductors BS 542- Specification for cable glands and sealing boxes for association with apparatus for use at mines and quarries BS 5G 178-1- Crimped joints for aircraft electrical cables and wires - Specification for design requirements (including tests) for components and tools BS - Electric cables - PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring BS - Electric cables - Single core unsheathed heat resisting cables for voltages up to and including 450/750 V, for internal wiring BS - Electric cables - Single core unsheathed heat resisting cables forvoltages up to and including 450/750 V, for internal wiring BS -1- Mechanical cable glands - Armour glands - Requirements and test methods BS -5- Mechanical cable glands - Code of practice for selection, installation and inspection of cable glands and armour glands BS -3- Mineral insulated cables with a rated voltage not exceeding 750 V. Guide to use BS - Specification for polyethylene insulation and sheath of electric cables BS 638-4- Arc welding power sources, equipment and accessories - Specification for welding cables BS - Specification for performance requirements for cables required to maintain circuit integrity under fire conditions BS - Specification for unfilled enclosures for the dry termination of HV cables for transformers and reactors BS - Specification for ground mounted distribution transformers for cable box or unit substation connection BS -99.1- Insulating and sheathing materials of electric cables - Test methods used in the United Kingdom but not specified in BS EN : Non-electrical tests BS -99.2- Insulating and sheathing materials of electric cables - Test methods used in the United Kingdom but not specified in BS EN or other Parts of BS : Electrical tests BS - Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including V BS - Electric cables - Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments BS -1- Wideband cabled distribution systems - Glossary of terms BS -2- Wideband cabled distribution systems - Methods of measurement BS -4- Wideband cabled distribution systems - Specification for performance requirements, for upstream television BS -5- Wideband cabled distribution systems - Recommendations for one-way and interactive data services BS - Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV BS - Telecommunications equipment and telecommunications cabling - Specification for installation, operation and maintenance BS - Flexible cables for use at mines and quarries BS - Electric cables - Thermosetting insulated, armoured cables for voltages of 600/ V and / V, having low emission of smoke and corrosive gases when affected by fire BS - Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units - Requirements and test methods BS - Guide for cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above BS -1- Cold pour resin compound and heat-shrink cable joints in the voltage range up to V a.c. and V d.c. Specification for materials BS -2- Cold pour resin compound and heat-shrink cable joints in the voltage range up to V a.c. and V d.c. Code of practice for on-site installation BS -6- Operation and maintenance of earth-moving machinery - Specification for identification and marking of electrical wires and cables BS - Specification for metal channel cable support systems for electrical installations BS - Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines BS - Specification for performance of bonds for electric power cable terminations and joints for system voltages up to 36 kV BS - Electric cables - Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire BS - Specification for separable insulated cable connector systems above 1 kV and up to 36 kV BS -6- Components for smoke and heat control systems - Specifications for cable systems BS - Specification for cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines BS - Method for determination of economic optimization of power cable size BS -2- Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V. Harmonized cable types from HD 21 and HD 22 BS -3- Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V. National standard cables not included in HD 21 and HD 22 BS - Code of practice for installation and inspection of uninsulated compression and mechanical connectors for power cables with copper or aluminium conductors BS -1- Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire - Multicore cables BS -2- Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire - Multipair cables BS -1.2- Specification for insulating and sheathing materials for cables - Part 1. Cross-linked elastomeric insulating compounds - Section 1.2 General 90 °C application BS -1.3- Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - XLPE - Sec1.3 XLPE BS -1.4- Specification for insulating and sheathing materials for cables - Elastomeric insulating compounds - Oil resisting types - Oil resisting types BS -1.5- Specification for insulating and sheathing materials for cables - Part 1: Cross-linked elastomeric insulating compounds - Section 1.5: Flame retardant composites BS -10.1- Specification for insulating and sheathing materials for cables - Part 10: Polyethylene sheathing compounds - Section 10.1: Thermoplastic medium density polyethylene (MDPE) sheathing compound BS -2.3- Specification for insulating and sheathing materials for cables - Elastomeric sheathing compounds - General application - General application BS -2.4- Specification for insulating and sheathing materials for cables - Part 2: Cross-linked elastomeric sheathing compounds - Section 2.4: Welding cable covering BS -2.6- Specification for insulating and sheathing materials for cables - Part 2: Cross-linked elastomeric sheathing compounds - Section 2.6: Sheathing compounds for ships' wiring and offshore applications BS -3.2- Specification for insulating and sheathing materials for cables - PVC insulating compounds - Hard grade types - Hard grade types BS -4.2- Specification for insulating and sheathing materials for cables - PVC sheathing compounds - General application - General application BS - Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm2 BS -1.1- Electric cables - Calculation of the current rating - Current rating equations (100% load factor) and calculation of losses - General BS -1.2- Electric cables - Calculation of the current rating - Current rating equations (100% load factor) and calculation of losses - Sheath eddy current loss factors for two circuits in flat formation BS -2-2.1- Electric cables - Calculation of the current rating - Thermal resistance - Calculation of thermal resistance - Section 2.1: Calculation of thermal resistance BS -2.1- Electric cables - Calculation of the current rating - Thermal resistance - Calculation of thermal resistance BS -2.2- Electric cables - Calculation of the current rating - Thermal resistance - A method for calculating reduction factors for groups of cables in free air, protected from solar radiation BS -3.1- Electric cables - Calculation of the current rating - Sections on operating conditions - Reference operating conditions and selection of cable type BS -3- Determination of long-term radiation ageing in polymers - Procedures for in-service monitoring of low-voltage cable materials BS -2.1- Three phase oil-immersed distribution transformers, 50 Hz, from 50 to kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - General requirements BS -2.2- Three phase oil-immersed distribution transformers, 50 Hz, from 50 to kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - Cable boxes of type 1 for use on distribution transformers meeting the requirements of BS -2.1 BS -2.3- Three phase oil-immersed distribution transformers, 50 Hz, from 50 to kVA with highest voltage for equipment not exceeding 36 kV - Distribution transformers with cable boxes on the high voltage and/or low voltage side - Cable boxes type 2 for use on distribution transformers meeting the requirements of BS -2.1 BS - Specification for armoured cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV having low emission of smoke and corrosive gases when affected by fire BS - Electric cables - 600/ V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire BS -2- Strata reinforcement support system components used in coal mines - Specification for birdcaged cablebolting BS 787-1- Specification for mining type flameproof gate-end boxes - Gate-end boxes for direct-on-line motor starting (for use on 3-phase a.c. circuits up to 650 V) BS 787-2- Specification for mining type flameproof gate-end boxes - Gate-end boxes with air-break circuit-breakers (for use on 3-phase a.c. circuits up to 650 volts) BS 787-3- Specification for mining type flameproof gate-end boxes - Gate-end boxes with lighting transformers BS 787-4- Specification for mining type flameproof gate-end boxes - Gate-end boxes for drilling machines (for use on 3-phase a.c. circuits up to 650 V) BS -1- LV and MV polymeric insulated cables for use by distribution and generation utilities - General BS -2- LV and MV polymeric insulated cables for use by distribution and generation utilities - Methods of test BS -3.10- LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors BS -3.11- LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors BS -3.12- LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors, having low emission of smoke and corrosive gases when affected by fire BS -3.20- LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated split concentric cables with copper or aluminium conductors BS -3.21- LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated split concentric cables with copper or aluminium conductors BS -3.40- LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated, copper wire waveform concentric cables with solid aluminium conductors BS -3.50- LV and MV polymeric insulated cables for use by distribution and generation utilities - Part 3: Specification for distribution cables of rated voltage 0.6/1 kV - Section : XLPE insulated, copper wire waveform or helical concentric cables with solid aluminium conductors, having low emission of smoke and corrosive gases when affected by fire (Implementation of HD 603) BS -4.10- LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single-core 11 kV and 33 kV cables - Single core 11 kV and 33 kV cables BS -4.11- LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Single-core 33 kV lead sheathed cables - Single core 33 kV lead sheathed cables BS -4.20- LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV - Three-core 11 kV cables - Three core 11 kV cables BS -5- LV and MV polymeric insulated cables for use by distribution and generation utilities - Polymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for overhead distribution BS -6.1- LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - PVC insulated and PVC sheathed cables BS -6.2- LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - XLPE or HEPR insulated and PVC sheathed cables BS -6.3- LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations - Cables with thermosetting insulation and non-halogenated sheath BS -7.1- LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations - Single core and 3-core cables with halogenated materials and with aluminium or steel wire armouring BS -7.2- LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations - Single-core and 3-core cables with halogen-free materials and with aluminium or steel wire armouring BS -8.1- LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multicore cable with copper conductors - Section 8.1 Single wire armoured and PVC sheathed multicore cable with copper conductors BS -8.2- LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multipair cable with copper conductors - Section 8.2 Single wire armoured and PVC sheathed multipair cable with copper conductors BS -8.3- LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation performance - Section 8.3 Single wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation performance BS -8.4- LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire or double steel tape armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance - Section 8.4 Single wire or double steel tape armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance BS -8.5- LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire armoured and unarmoured multicore cables with copper conductors and non-halogenated sheath - Section 8.5 Single wire armoured and unarmoured multicore cables with copper conductors and non-halogenated sheath BS -8.6- LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for multicore and multipair cables for installation above and below ground - Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors - Section 8.6 Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors BS -4.1- Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2)kV up to 20,8/36(42)kV - Part 1: Cables with extruded insulation BS -4.2- Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42)kV - Part 2: Cables with impregnated paper insulation BS - Electric cables - Thermosetting insulated, unarmoured cables for a voltage of 600/ V BS - MV impregnated paper insulated distribution cables of rated voltages of 3.8/6.6 kV to 19/33 kV BS - Power cables with XLPE insulation and metallic sheath, and their accessories, for rated voltages from 66 kV (Um=72.5 kV) to 132kV (Um=145kV) - Requirements and test methods BS - Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units - Requirements and test methods BS - Electric cables - Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments BS - Electric cables - Fluid-filled, paper- and PPL-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV (Um = 420 kV) - Requirements and test methods BS - Electric cables - Internal gas-pressure cables and accessories for alternating voltages up to and including 275 kV (Um = 300 kV) - Requirements and test methods BS -1- Electric cables - Accessories - Material characterization - Resinous compounds before cure and in the cured state BS - Electric cables - Metallic wire and foil sheath constructions of power cables having XLPE insulation for rated voltages from 66kV (Um = 72.5 kV) to 132kV (Um = 145 kV) BS -2- Methods of test for assessment of the fire integrity of electric cables - Test for unprotected small cables for use in emergency circuits - BS EN with 930 deg flame and with water spray BS - Electric cables - 300/500 V screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids - Multicore cables BS 91- Electric cable soldering sockets - Specification BS AU 16a- Specification for electrical cable connectors (17.5 A maximum continuous rating) BS AU 255-1- Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thick walled insulated cables BS AU 255-2- Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thin walled insulated cables BS AU 267- Code of practice for breakaway cables and secondary couplings BS AU 7a- Specification for colour code for road vehicle electrical cables BS AU 88a- Recommendations for ratings for light duty cables for automobile use BS AU 91- Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (cars and light commercial vehicles using positive earth system) BS DD CLC/TS - Optical fibre cables - Sewer cables - Family specification for cables to be installed in storm and sanitary sewers BS DD CLC/TS - Optical fibre cables - Gas pipe cables - Family specifications for cables to be installed in high pressure gas pipes BS DD CLC/TS - Optical fibre cables - Drinking water pipe cables - Family specification for cables to be installed in drinking water pipes BS DD ENV -2- Public transport - Road vehicle scheduling and control systems - WORLDFIP cabling specifications BS DD IEC/PAS - Screened balanced cables - Coupling attenuation measurement, triaxial method BS DD ISO/TS - Road vehicles - Data cables - Test methods and requirements BS EN -1- Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Land cables BS EN -2- Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Submarine cables BS EN - Lead and alloys - Lead alloy ingots for electric cable sheathing and for sleeves BS EN - Plastic warning devices for underground cables and pipelines with visual characteristics BS EN -5- Public transport - Road vehicle scheduling and control systems - CANopen cabling specifications BS EN -3- Aluminium and aluminium alloys - Scrap - Wire and cable scrap BS EN - Harmonized system of quality assessment for electronic components - Sectional specification:cable outlet accessories for connectors, including qualification approval and capability approval BS EN - Connector sets for optical fibres and cables - Type OCCA-BU BS EN - Connector sets for optical fibres and cables - Type OCCA-PC BS EN - Harmonized system of quality assessment for electronic components - Sectional specification:connector sets for optical fibres and cables - Type RCC BS EN - Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type SC BS EN - Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type LSH BS EN - Harmonized system of quality assessment for electronic components - Connector sets for optical fibres and cables - Type MPO BS EN - Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables type MSC BS EN - Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type MF BS EN - Single mode optical cable (duct/direct buried installation) BS EN - Aerospace series - Copper and copper alloy conductors for electrical cables - Product standard BS EN - Cables, electric, single-core, general purpose, with conductors in copper or copper alloy &#; Technical specification BS EN -003- Cables, electrical, for general purpose &#; Operating temperatures between -55 °C and 200 °C &#; Part 003: Ink jet printable &#; Product standard BS EN -005- Cables, electrical, for general purpose &#; Operating temperatures between??-55 &#; and 200 &#; &#; Part 005: UV laser printable &#; Product standard BS EN -007- Cables, electrical, for general purpose &#; Operating temperatures between &#;55 &#; and 200 &#; &#; Part 007: UV laser printable multicore jacketed cable &#; Product standard BS EN -002- Cables, electrical, for general purpose &#; Operating temperatures between -55 °C and 260 °C &#; Part 002: General BS EN -003- Cables, electrical, for general purpose &#; Operating temperatures between -55 °C and 260 °C&#; Part 003: Inkjet printable &#; Product standard BS EN -007- Cables, electrical, for general purpose &#; Operating temperatures between -55 °C and 260 °C &#; Part 007: DMA family, single ink-jet printable and multicore assembly &#; Product standard BS EN -008- Cables, electrical, for general purpose &#; Operating temperatures between -55 °C and 260 °C &#; Part 008: DM family, single UV laser printable and multicore assembly &#; Product standard BS EN -009- Cables, electrical, for general purpose &#; Operating temperatures between -55 &#; and 260 &#; &#; Part 009: DRA family, single and multicore assembly &#; Product standard BS EN -010- Cables, electrical, for general purpose &#; Operating temperatures between -55 &#; and 260 &#; &#; Part 010: DR family, single UV laser printable &#; Product standard BS EN -609- Elements of electrical and optical connection &#; Test methods &#; Part 609: Optical elements &#; Effectiveness of cable attachment &#; Cable cyclic flexing BS EN -610- Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable pulling BS EN -611- Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable torsion BS EN -612- Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable axial compression BS EN -003- Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, ink jet printable - Product standard BS EN -007- Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, UV laser printable - Product standard BS EN -002- Cables, electrical, single and multicore for general purpose &#; Operating temperatures between -55 &#; and 260 &#; &#; Part 002: Screened and jacketed &#; General BS EN -003- Cables, electrical, single and multicore for general purpose &#; Operating temperatures between -55 &#; and 260 &#; &#; Part 003: Screened (spiral) and jacketed, ink jet printable &#; Product standard BS EN -007- Cables, electrical, single and multicore for general purpose &#; Operating temperatures between -55 &#; and 260 &#; &#; Part 007: Screened (spiral) and jacketed, UV laser printable &#; Product standard BS EN -011- Cables, electrical, single and multicore for general purpose &#; Operating temperatures between -55 &#; and 260 &#; &#; Part 011: DM family, screened (spiral) and jacketed, UV laser printable &#; Product standard BS EN -012- Cables, electrical, single and multicore for general purpose &#; Operating temperatures between -55 &#; and 260 &#; &#; Part 012: DM family, screened (braided) and jacketed, UV laser printable &#; Product standard BS EN -013- Cables, electrical, single and multicore for general purpose &#; Operating temperatures between -55 &#; and 260 &#; &#; Part 013: DR family, screened (spiral) and jacketed, UV laser printable &#; Product standard BS EN - Current ratings for electrical cables with conductor EN BS EN -100- Aerospace series - Cables, electrical, aircraft use - Test methods - General BS EN -201- Aerospace series - Cables, electrical, aircraft use - Test methods - Visual examination BS EN -202- Aerospace series - Cables, electrical, aircraft use - Test methods - Mass BS EN -301- Aerospace series - Cables, electrical, aircraft use - Test methods - Ohmic resistance per unit length BS EN -303- Aerospace series - Cables, electrical, aircraft use - Test methods - Insulation resistance BS EN -304- Aerospace series - Cables, electrical, aircraft use - Test methods - Surface resistance BS EN -305- Aerospace series - Cables, electrical, aircraft use - Test methods - Overload resistance BS EN -306- Cables, electrical, aircraft use &#; Test methods &#; Part 306: Continuity of conductors BS EN -307- Cables, electrical, aircraft use &#; Test methods &#; Part 307: Corona extinction voltage BS EN -401- Aerospace series - Cables, electrical, aircraft use - Test methods - Accelerated ageing BS EN -402- Aerospace series - Cables, electrical, aircraft use - Test methods - Shrinkage and delamination BS EN -403- Aerospace series - Cables, electrical, aircraft use - Test methods - Delamination and blocking BS EN -404- Aerospace series - Cables, electrical, aircraft use - Test methods - Thermal shock BS EN -405- Aerospace series - Cables, electrical, aircraft use - Test methods - Bending at ambient temperature BS EN -406- Aerospace series - Cables, electrical, aircraft use - Test methods - Cold bend test BS EN -407- Cables, electrical, aircraft use &#; Test methods &#; Part 407: Flammability BS EN -408- Cables, electrical, aircraft use &#; Test methods &#; Part 408: Fire resistance BS EN -409- Aerospace series - Cables, electrical, aircraft use - Test methods - Air-excluded ageing BS EN -410- Aerospace series - Cables, electrical, aircraft use - Test methods - Thermal endurance BS EN -411- Cables, electrical, aircraft use &#; Test methods &#; Part 411: Resistance to fluids BS EN -412- Aerospace series - Cables, electrical, aircraft use - Test methods - Humidity resistance BS EN -413- Aerospace series - Cables, electrical, aircraft use - Test methods - Wrap back test BS EN -414- Cables, electrical, aircraft use &#; Test methods &#; Part 414: Differential scanning calorimeter (DSC test) BS EN -415- Cables, electrical, aircraft use &#; Test methods &#; Part 415: Rapid change of temperature BS EN -416- Cables, electrical, aircraft use &#; Test methods &#; Part 416: Thermal stability BS EN -501- Aerospace series - Cables, electrical, aircraft use - Test methods - Dynamic cut-through BS EN -502- Aerospace series - Cables, electrical, aircraft use - Test methods - Notch propagation BS EN -503- Aerospace series - Cables, electrical, aircraft use - Test methods - Scrape abrasion BS EN -504- Aerospace series - Cables, electrical, aircraft use - Test methods - Torsion BS EN -505- Aerospace series - Cables, electrical, aircraft use - Test methods - Tensile tests on conductors and strands BS EN -506- Aerospace series - Cables, electrical, aircraft use - Test methods - Plating continuity BS EN -507- Aerospace series - Cables, electrical, aircraft use - Test methods - Adherence of plating BS EN -508- Aerospace series - Cables, electrical, aircraft use - Test methods - Plating thickness BS EN -509- Aerospace series - Cables, electrical, aircraft use - Test methods - Solderability BS EN -510- Aerospace series - Cables, electrical, aircraft use - Test methods - Tensile strength and elongation of extruded insulation, sheath and jacket material BS EN -511- Aerospace series - Cables, electrical, aircraft use - Test methods - Cable-to-cable abrasion BS EN -512- Aerospace series - Cables, electrical, aircraft use - Test methods - Flexure endurance BS EN -513- Cables, electrical, aircraft use &#; Test methods &#; Part 513: Deformation resistance (Installation with plastic cable ties) BS EN -603- Aerospace series - Cables, electrical, aircraft use - Test methods - Resistance to wet arc tracking BS EN -604- Aerospace series - Cables, electrical, aircraft use - Test methods - Resistance to dry arc propagation BS EN -605- Aerospace series - Cables, electrical, aircraft use - Test methods - Wet short circuit test BS EN -701- Aerospace series - Cables, electrical, aircraft use - Test methods - Strippability and adherence of insulation to the conductor BS EN -702- Aerospace series - Cables, electrical, aircraft use - Test methods - Screen pushback capability BS EN -703- Aerospace series - Cables, electrical, aircraft use - Test methods - Permanence of manufacturer's marking BS EN -704- Aerospace series - Cables, electrical, aircraft use - Test methods - Flexibility BS EN -705- Cables, electrical, aircraft use &#; Test methods &#; Part 705: Contrast measurement BS EN -706- Cables, electrical, aircraft use &#; Test methods &#; Part 706: Laser markability BS EN -801- Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance per unit length BS EN -802- Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance unbalance BS EN -803- Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance variation BS EN -804- Aerospace series - Cables, electrical, aircraft use - Test methods - Velocity of propagation BS EN -805- Aerospace series - Cables, electrical, aircraft use - Test methods - Characteristic impedance BS EN -806- Aerospace series - Cables, electrical, aircraft use - Test methods - Attenuation BS EN -807- Aerospace series - Cables, electrical, aircraft use - Test methods - Transfer impedance BS EN -808- Aerospace series - Cables, electrical, aircraft use - Test methods - Cross-talk BS EN - Aluminium or aluminium alloy conductors for electrical cables &#; Product standard BS EN -511- Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Cable to cable abrasion BS EN -002- Thermocouple extension cable &#; Operating temperatures between -65 °C and 260 °C &#; Part 002: General BS EN -201- Cable ties for harnesses &#; Test methods &#; Part 201: Visual examination BS EN -202- Cable ties for harnesses &#; Test methods &#; Part 202: Examination of mass and dimensions BS EN -301- Cable ties for harnesses &#; Test methods &#; Part 301: Salt mist test BS EN -303- Cable ties for harnesses &#; Test methods &#; Part 303: Resistance to fluids BS EN -305- Cable ties for harnesses -- Test methods -- Part 305: Coulor fastness?? BS EN -405- Cable ties for harnesses &#; Test methods &#; Part 405: Compass safe distance BS EN -407- Cable ties for harnesses &#; Test methods &#; Part 407: Verification of application tool settings BS EN -013- Connectors, electrical, rectangular, modular &#; Operating temperature 175 &#; continuous??&#; Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 &#; Product standard BS EN - Copper or copper alloy lightweight conductors for electrical cables &#; Product standard (Normal and tight tolerances) BS EN -2-8- Guide for procurement of power station equipment - Electrical equipment - Power cables BS EN -10- Cabled distribution systems for television and sound signals - System performance for return paths BS EN -3- Cabled distribution systems for television and sound signals - Active wideband equipment for coaxial cable networks BS EN -4- Cabled distribution systems for television and sound signals - Passive wideband equipment for coaxial cable networks BS EN -5- Cabled distribution systems for television and sound signals - Headend equipment BS EN -7- Cabled distribution systems for television and sound signals - System performance BS EN -8- Cabled distribution systems for television and sound signals - Electromagnetic compatibility for networks BS EN -9- Cabled distribution systems for television and sound signals - Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams BS EN -2-3- Cable trunking and cable ducting systems for electrical installations - Particular requirements for slotted cable trunking systems intended for installation in cabinets - Section 3: Slotted in cabinets BS EN -9-1- Home and building electronic systems (HBES) - Installation requirements - Generic cabling for HBES class 1 twisted pair BS EN -1- Customer premises cabling for information technology - ISDN basic access BS EN -2- Customer premises cabling for information technology - kbit/s ISDN primary access and leased line network interface BS EN -1- Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - General requirements and tests BS EN -2-1- Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Radio frequency connectors and concentric contacts - Open throat tools with fixed dies, sizes A to E, V and W BS EN -2-2- Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Radio frequency connectors and concentric contacts - Open throat tools with removable and interchangeable dies, sizes A to G, Q to T, V and W BS EN -2-3- Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Contacts of electrical connectors BS EN -2-4- Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Centre contacts of RF connectors, series SMZ BS EN -2-5- Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Termination of twin-ax cable for databus applications BS EN -1- Coaxial cables - Part 1: Generic specification BS EN -2-1- Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - MHz BS EN -2-2- Coaxial cables - Part 2-2: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - MHz BS EN -2-3- Coaxial cables - Part 2-3: Sectional specification for cables used in cabled distribution networks - Distribution and trunk cables for systems operating at 5 MHz - MHz BS EN -2-4- Coaxial cables - Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - MHz BS EN -2-5- Coaxial cables - Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - MHz BS EN -3-1- Coaxial cables - Sectional specifications for cables used in telecom applications - Miniaturized cables used in digital communication systems BS EN -3- Coaxial cables used in cabled distribution networks - Part 3: Sectional specification for outdoor drop cables BS EN -4- Coaxial cables used in cabled distribution networks - Part 4: Sectional specification for distribution and trunk cables BS EN -5- Coaxial cables used in cabled distribution networks - Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and MHz BS EN -6- Coaxial cables used in cabled distribution networks - Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and MHz BS EN - Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV BS EN - Cable ties for electrical installations BS EN -1- Information technology - Generic cabling systems - General requirements and office areas BS EN -1- Information technology - Cabling installation - Specification and quality assurance BS EN -2- Information technology - Cabling installation - Installation planning and practices inside buildings BS EN -3- Installation technology - Cabling installation - Installation planning and practices outside buildings BS EN - Method of test for resistance to fire of unprotected small cables for use in emergency circuits BS EN - Flexible cables for lifts BS EN - Electromagnetic locators for buried pipes and cables - Performance and safety BS EN - Cable glands for electrical installations BS EN -1- Railway applications - Railway rolling stock cables having special fire performance - Standard wall - General requirements BS EN -2- Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Single core cables BS EN -3- Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Multicore cables BS EN -1- Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus BS EN -2-1- Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category A F/R BS EN -2-2- Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category A BS EN -2-3- Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category B BS EN -2-4- Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category C BS EN -2-5- Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Small cables - Category D BS EN -1- Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Apparatus BS EN -2-1- Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of the amount of halogen acid gas - Determination of the amount of halogen acid gas BS EN -2-2- Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity - Determination of degree of acidity of gases for materials by measuring pH and conductivity BS EN -2-3- Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity BS EN -1- Multi-element metallic cables used in analogue and digital communication and control - Generic specification BS EN -2-1- Multi-element metallic cables used in analogue and digital communication and control - Horizontal and building backbone cables - Horizontal and building backbone cables BS EN -2-2- Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 100 MHz - Work area and patch cord cables BS EN -3-1- Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterized up to 100 MHz - Horizontal and building backbone cables BS EN -3-2- Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables - Work area and patch cord cables BS EN -4-1- Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 600 MHz - Horizontal and building backbone cables BS EN -4-2- Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 600 MHz - Work area and patch cord cables BS EN -5-1- Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables BS EN -5-2- Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables BS EN -6-1- Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables BS EN -6-2- Multi-element metallic cables used in analogue and digital communication and control - Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables BS EN -1-1- Communication cables - Specifications for test methods - Electrical test methods - General requirements - General requirements BS EN -1-10- Communication cables - Specifications for test methods - Electrical test methods - Crosstalk BS EN -1-11- Communication cables - Specifications for test methods - Electrical test methods - Characteristic impedance, input impedance, return loss BS EN -1-12- Communication cables - Specifications for test methods - Electrical test methods - Inductance BS EN -1-13- Communication cables - Specifications for test methods - Electrical test methods - Coupling attenuation or screening attenuation of patch cords/coaxial cable assemblies/pre-connectorised cables BS EN -1-14- Communication cables - Specifications for test methods - Electrical test methods - Coupling attenuation or screening attenuation of connecting hardware BS EN -1-15- Communication cables - Specifications for test methods - Electromagnetic performance - Coupling attenuation of links and channels (laboratory conditions) BS EN -1-2- Communication cables - Specifications for test methods - Electrical test methods - DC resistance - d.c.resistance BS EN -1-3- Communication cables - Specifications for test methods - Electrical test methods - Dielectric strength - Dielectric strength BS EN -1-4- Communication cables - Specifications for test methods - Electrical test methods - Insulation resistance BS EN -1-5- Communication cables - Specifications for test methods - Electrical test methods - Capacitance - SEC5 : Capacitance BS EN -1-6- Communication cables - Specifications for test methods - Electrical test methods - Electromagnetic performance BS EN -1-7- Communication cables - Specifications for test methods - Electrical test methods - Velocity of propagation - sec7 : Velocity of propagation BS EN -1-8- Communication cables - Specifications for test methods - Electrical test methods - Attentuation - Sec8 : attentuation BS EN -1-9- Communication cables - Specifications for test methods - Electrical test methods - Unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss) BS EN -3-1- Communication cables - Specifications for test methods - Mechanical test methods - General requirements - General requirements BS EN -3-10- Communication cables - Specifications for tests methods - Mechanical test methods - Torsion and twisting BS EN -3-11- Communication cables - Specifications for test methods - Mechanical test methods - Cable cut-through resistance BS EN -3-12- Communication cables - Specifications for test methods - Mechanical test methods - Shot gun damage BS EN -3-13- Communication cables - Specifications for test methods - Mechanical test methods - Aeolian vibration BS EN -3-15- Communication cables - Specifications for test methods - Mechanical test methods - Underwater cable resistance to hydrostatic pressure BS EN -3-16- Communication cables - Specifications for test methods - Mechanical test methods - Cable tensile performance BS EN -3-17- Communication cables - Specifications for test methods - Mechanical test methods - Adhesion of dielectric and sheath BS EN -3-2- Communication cables - Specifications for test methods - Mechanical test methods - Tensile strength and elongation for conductor BS EN -3-4- Communication cables - Specifications for test methods - Mechanical test methods - Tensile strength, elongation and shrinkage of insulation and sheath BS EN -3-5- Communication cables - Specifications for test methods - Mechanical test methods - Crush resistance of the cable BS EN -3-6- Communication cables - Specifications for test methods - Mechanical test methods - Impact resistance of the cable BS EN -3-7- Communication cables - Specifications for test methods - Mechanical test methods - Abrasion resistance of the cable sheath BS EN -3-8- Communication cables - Specifications for test methods - Mechanical test methods - Abrasion resistance of cable sheath markings BS EN -3-9- Communication cables - Specifications for test methods - Mechanical test methods - Bending tests BS EN -4-1- Communication cables - Specifications for test methods - Environmental test methods - General requirements BS EN -4-11- Communication cables - Specifications for test methods - Environmental test methods - A horizontal integrated fire test method BS EN -4-12- Communication cables - Specifications for test methods - Environmental test methods - Vertical flame spread test on bunched small communication cables BS EN -4-14- Communication cables - Specifications for test methods - Environmental test methods - Lightning BS EN -4-2- Communication cables - Specifications for test methods - Environmental test methods - Water penetration BS EN -4-6- Communication cables - Specifications for test methods - Environmental test methods - Temperature cycling BS EN -4-9- Communication cables - Specifications for test methods - Environmental test methods - Pneumatic resistance BS EN -1-1- Communication cables - General BS EN -1-2- Communication cables - Definitions BS EN -2-1- Communication cables - Common design rules and construction BS EN -2-20- Communication cables - Common design rules and construction - General BS EN -2-21- Communication cables - Part 2-21: Common design rules and construction - PVC insulation compounds BS EN -2-22- Communication cables - Part 2-22: Common design rules and construction - PVC sheathing compounds BS EN -2-23- Communication cables - Part 2-23: Common design rules and construction - PE insulation BS EN -2-24- Communication cables - Common design rules and construction - PE sheathing BS EN -2-25- Communication cables - Common design rules and construction - Polypropylene insulation compounds BS EN -2-26- Communication cables - Common design rules and construction - Halogen free flame retardant insulation compounds BS EN -2-27- Communication cables - Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds BS EN -2-28- Communication cables - Common design rules and construction - Filling compounds for filled cables BS EN -2-29- Communication cables - Common design rules and construction - Cross-linked PE insulation compounds BS EN -2-30- Communication cables - Common design rules and construction - Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing BS EN -4-1- Communication cables - General considerations for the use of cables - Environmental conditions and safety aspects BS EN - Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment Um from 72,5 kV to 550 kV BS EN - Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards BS EN -1- Railway applications - Railway rolling stock cables having special fire performance - Thin wall - General requirements BS EN -2- Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Single core cables BS EN -3- Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed BS EN -4- Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Multicore and multipair cables standard wall sheathed BS EN - Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables BS EN - Marking by inscription for the identification of cores of electric cables BS EN - Bushings for transformers and reactor cable boxes not exceeding 36 kV BS EN - Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV BS EN - Railway applications - Rolling stock - Rules for installation of cabling BS EN - Information technology - Cabling installation - Testing of installed cabling BS EN - Railway applications - Railway rolling stock cables having special fire performance - Thin wall and standard wall - Guide to use BS EN - Method for spark testing of cables BS EN - Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits BS EN -0- Insulating, sheathing and covering materials for low voltage energy cables - General introduction BS EN -1- Insulating, sheathing and covering materials for low voltage energy cables &#; Part 1: Cross-linked elastomeric insulating compounds BS EN -2-1- Insulating, sheathing and covering materials for low voltage energy cables &#; Part 2-1: Cross-linked elastomeric sheathing compounds BS EN -2-2- Insulating, sheathing and covering materials for low voltage energy cables &#; Part 2-2: Cross-linked elastomeric covering compounds BS EN -3- Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds BS EN -4-1- Insulating, sheathing and covering materials for low voltage energy cables &#; Part 4-1: PVC sheathing compounds BS EN -4-2- Insulating, sheathing and covering materials for low voltage energy cables &#; Part 4-2: PVC covering compounds BS EN - Cable cleats for electrical installations BS EN - Liquid tight sheathing systems for cable management BS EN -1- End user multi-pair cables used in high bit rate telecommunication networks - Aerial cables BS EN -2- End user multi-pair cables used in high bit rate telecommunication networks - Duct and buried cables BS EN -1- Multi-pair cables used in high bit rate digital access telecommunication networks - Outdoor cables BS EN - Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by lead sulphide staining BS EN -24- Radio-frequency connectors - Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F) BS EN -25- Radio-frequency connectors - Two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (Type TWHN) BS EN - Conductors of insulated cables BS EN - Impulse tests on cables and their accessories BS EN -1-1- Tests on electrical and optical cables under fire conditions - Test for a vertical flame propagation for a single insulated wire or cable - Apparatus BS EN -1-2- Tests on electric and optical fibre cables under fire conditions - Test for vertfical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame BS EN -1-3- Tests on electric and optical fibre cables under fire conditions - Test for vertical flame propagation for a single vertical insulated wire or cable - Procedure for determination of flaming droplets/particles BS EN -2-1- Tests on electric and optical fibre cables under fire conditions - Test for vertical flame propagation for a single small insulated wire or cable - Apparatus BS EN -2-2- Tests on electric and optical fibre cables under fire conditions - Tests for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame BS EN -3-8- Specification for insulating materials based on mica - Specifications for individual materials - Mica paper tapes for flame-resistant security cables BS EN -5- Specification for low-voltage switchgear and controlgear assemblies - Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks BS EN - Specification for unused insulating mineral oils for cables with oil ducts BS EN - High-voltage cable plug and socket connections for medical X-ray equipment BS EN -9- Connectors for frequencies below 3 MHz for use with printed boards - Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) BS EN -1- Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Cables BS EN -2- Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Terminations BS EN - Calculation for the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V BS EN -6- Cable networks for television signals, sound signals and interactive services - Optical equipment BS EN -7-1- Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Physical (PHY) layer specification BS EN -7-2- Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Media access control (MAC) layer specification BS EN -7-3- Cable networks for television signals, sound signals and interactive services - Hybrid fibre coax outside plant status monitoring - Power supply to transponder interface bus (PSTIB) - Specification BS EN -1-1- Optical fibre cables - Generic specification - General BS EN -1-2- Optical fibre cables - Generic specification - Basic optical cable test procedures BS EN -2-11- Optical fibre cables &#; Part 2-11: Indoor cables &#; Detailed specification for simplex and duplex cables for use in premises cabling BS EN -2-21- Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution Cables for use in premises cabling BS EN -2-31- Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling BS EN -3-10- Optical fibre cables - Outdoor cables - Family specification for duct and directly buried optical telecommunication cables BS EN -3-20- Optical fibre cables - Outdoor cables - Family specification for optical self-supporting aerial telecommunication cables BS EN -3- Optical fibre cables - Sectional specification - Outdoor cables BS EN -1-1- Insulating and sheathing materials of electric cables - Common test methods - General application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties - Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties BS EN -1-2- Insulating and sheathing materials of electric cables - Common test methods - General application - Thermal ageing methods BS EN -1-3- Insulating and sheathing materials of electric cables - Common test methods - General application - Methods for determining the density - Water absorption tests - Shrinkage test - Section 3: Methods for determining the density - Water absorption tests - Shrinking test BS EN -1-4- Insulating and sheathing materials of electric cables - Common test methods - General application - Tests at low temperature BS EN -2-1- Insulating and sheathing materials of electric cables - Common test methods - Methods specific to elastomeric compounds - Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests BS EN -3-1- Insulating and sheathing materials of electric cables - Common test methods - Methods specific to PVC compounds - Pressure test at high temperature - Tests for resistance to cracking BS EN -3-2- Insulating and sheathing materials of electric cables - Common test methods - Methods specific to PVC compounds - Loss of mass test - Thermal stability test BS EN -4-1- Insulating and sheathing materials of electric and optical cables - Common test methods - Methods specific to polypropylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filter content measurement in PE by direct combustion - Measurement of carbon black content by TGA - Assessment of carbon black dispersion in polyethylene using a microscope BS EN -4-2- Insulating and sheathing materials of electric and optical cables - Common test methods - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation BS EN -5-1- Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C BS EN -17- Connectors for optical fibres and cables - Sectional specification for fibre optic connector - Type F-05 (friction lock) BS EN -2- Electrical test methods for electric cables - Partial discharge tests BS EN -3- Electrical test methods for electric cables - Test methods for partial discharge measurements on lengths of extruded power cables BS EN -1- Radio frequency and coaxial cable assemblies - Generic specification - General requirements and test methods BS EN -2-1- Radio frequency and coaxial cable assemblies - Sectional specification for flexible coaxial cable assemblies BS EN -2-2- Radio frequency and coaxial cable assemblies - Blank detail specification for flexible coaxial cable assemblies BS EN -2-3- Radio frequency and coaxial cable assemblies - Detail specification for flexible coaxial cable assemblies BS EN -2-4- Radio frequency and coaxial cable assemblies - Detail specification for cable assemblies for radio and TV receivers Frequency range 0 to MHz, IEC -2 connectors BS EN -2-5- Radio frequency and coaxial cable assemblies - Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to MHz, IEC -2 connectors BS EN -2-6- Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to MHz, IEC -24 connectors BS EN -3-1- Radio frequency and coaxial cable assemblies - Blank detail specification for semi-flexible coaxial cable assemblies BS EN -3-2- Radio frequency and coaxial cable assemblies - Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz) BS EN -3- Radio frequency and coaxial cable assemblies - Sectional specification for semi-flexible coaxial cable assemblies BS EN -4-1- Radio frequency and coaxial cable assemblies - Blank detail specification for semi-rigid coaxial cable assemblies BS EN -4- Radio frequency and coaxial cable assemblies - Sectional specification for semi-rigid coaxial cable assemblies BS EN -2- Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements BS EN -3-103- Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) BS EN -4-103- Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm - Cable to board connectors, shielded against EMC ,grid 2,5 mm,for high speed data rates,for use with printed boards BS EN -4-108- Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC -1 BS EN -4-110- Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Printed board connectors - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function BS EN -7-001- Connectors for electronic equipment - Cable outlet accessories - Blank detail specification BS EN - Cables for portable earthing and short-circuiting equipment BS EN -24- Radio-frequency connectors - Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F) BS EN -2- Radio-frequency cables - Specifications - Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation BS EN -3- Radio-frequency cables - Specifications - Sectional specification for coaxial cables for local area networks BS EN -3-2- Radio-frequency cables - Specifications - Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s BS EN -3-3- Radio-frequency cables - Specifications - Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s BS EN -4- Coaxial communication cables - Sectional specification for radiating cables BS EN -1- Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Test methods and requirements BS EN - Electrical accessories - Cable reels for household and similar purposes BS EN -1-1- Optical fibre amplifiers.Basic spectrum analyzers - Transmitter output optical power measurement for single-mode optical fibre cable BS EN -4-2- Fibre optic communication subsystem basic test procedures - Fibre optic cable plant - Single-mode fibre optic cable plant attenuation BS EN -2-35- Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable nutation BS EN -2-37- Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable bending for closures BS EN -2-4- Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Fibre/cable retention BS EN -1- Fibre optic passive components and cable assemblies - Capability approval - Generic specification BS EN - Industrial cable reels BS EN -1- Conduit systems for cable management - General requirements BS EN -21- Conduit systems for cable management - Particular requirements - Rigid conduit systems BS EN -22- Conduit systems for cable management - Particular requirements - Pliable conduit systems BS EN -23- Conduit systems for cable management - Particular requirements - Flexible conduit systems BS EN - Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV) BS EN - Mineral insulated thermocouple cables and thermocouples BS EN - Cable tray systems and cable ladder systems for cable management BS EN - Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method BS EN -1- Testing of balanced communication cabling in accordance with standards series EN &#; Part 1: Installed cabling BS EN -2- Testing of balanced communication cabling in accordance with standards series EN &#; Part 2: Patch cords and work area cords BS EN -1- Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Generic specification BS EN - RF connectors, connector cable assemblies and cables - Intermodulation level measurement BS EN -1-1- Metallic communication cables test methods - Electrical - Measurement of the pulse/step return loss in the frequency domain using the inverse discrete fourier transformation(IDFT) BS EN -4-2- Metallic communication cable test methods - Electromagnetic compatibility - Screening and coupling attenuation - Injection clamp method BS EN ISO - Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere BS EN ISO - Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics BS EN ISO - Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data BS EN ISO -1- Water-cooled secondary connection cables for resistance welding - Dimensions and requirements for double-conductor connection cables BS EN ISO -2- Water-cooled secondary connection cables for resistance welding - Dimensions and requirements for single-conductor connection cables BS EN ISO -3- Water-cooled secondary connection cables for resistance welding - Test requirements BS G 177- Specification for Nyvin type electrical cables for aircraft BS G 184 to G 188- Specification for aluminium terminal ends and in-line connectors for hexagonal crimping to aircraft aluminium electrical cables BS G 189- Specification for Tersil type electrical cables for aircraft BS G 192- Specification for Efglas type electric cables with copper conductors for aircraft BS G 195- Specification for Minyvin type electric cables for aircraft BS G 198-5- Sleeves for aircraft electric cables and equipment wires - Specification for heat shrinkable moulded shapes BS G 212- Specification for general requirements for aircraft electrical cables BS G 222- Specification for Efglas type electric cables (metric units) BS G 227- Specification for Tersil type electric cables (metric units) BS G 235- Specification for electric cables for general airframe or equipment interconnect use (150 °C), wrapped insulation with silver plated conductors BS G 236- Specification for electric cables for general airframe or equipment interconnect use (200 °C), wrapped insulation with nickel plated conductors BS G 237- Specification for electric cables for general airframe or equipment interconnect use (200 °C), extruded insulation with nickel plated conductors BS G 241- Specification for fire proof electric cables for engine fire zone and airframe use BS G 243- Specification for igniter cables for engine use (4 kV d.c.) BS G 246- Specification for cable ties for installation under controlled tension on aircraft electric cable harnesses BS G 250- Specification for identification marking of electric cables BS G 258- Glossary of terms for electrical cables and cable harnesses BS IEC -1-3- Electric cables - Calculation of the current rating - Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses BS IEC - Coaxial connectors used in nuclear laboratory instrumentation BS IEC -3- Calculation of the cyclic and emergency current rating of cables - Cyclic rating factor for cables of all voltages, with partial drying of the soil BS IEC -14-1- Connectors for optical fibres and cables - Detail specification for fibre optic connector type SC-PC standard terminated to multimode fibre type A1a, A1b BS IEC -5-2- Electromagnetic compatibility (EMC) - Installation and mitigation guidelines - Earthing and cabling BS ISO -3- Textile machinery and accessories - Yarn feeders and yarn control for knitting machines - Dimensions for connecting and interconnection cables BS ISO - Road vehicles - Unscreened high-voltage ignition cables - General specifications, test methods and requirements BS ISO -1- Road vehicles - Multi-core connecting cables - Test methods and requirements for basic performance sheathed cables BS ISO - Road vehicles - Unscreened high-voltage ignition cable assemblies - Test methods and general requirements BS ISO/IEC - Information technology. Microprocessor systems. VICbus. Inter-crate cable bus BS ISO/IEC -1- Information technology - Configuration of customer premises cabling (CPC) for applications - ISDN basic access BS QC - Radio-frequency connectors - RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 ohms (Type SMB) DD ENV -2- Public transport. Road vehicle scheduling and control systems. WORLDFIP cabling specifications DD IEC PAS -1- Multi-pair cables used in high bit rate digital access telecommunication networks. Outdoor Cables FD Z 86-154- DIGITAL VIDEO BROADCASTING (DVB). IMPLEMENTATION GUIDELINES FOR THE USE OF MPEG-2 SYSTEMS. VIDEO AND AUDIO IN SATELLITE AND CABLE BROADCASTING APPLICATIONS. KIT 79- Information technology - Cabling systems pack PD -2- Home and building electronic systems.Technical report 1. Guidelines for the professional installation of Twisted Pair cables class 1

British Standards Institution (BSI) is the UK National Standards body covering both electrical and non-electrical matters.  It is an independent organisation incorporated by Royal Charter which, although deriving some of its income from HMG, it is not owned by them, its Head Quarters are London.

If you want to learn more, please visit our website.

Electrotechnical matters including British Standard Cables are dealt with by British Electrotechnical Committee L/- -.
Two very active and important Technical Committee&#;s within L/- &#; are

GEL/20 &#; Electric cables which is responsible for producing the British Standards covering insulated conductors, electric cables and flexible cords along with their accessories, for both low and high voltages however they do not cover telecommunications wires and cables. GEL/20 is also responsible for the UK input to the work of IEC/TC20 (Worldwide) and CENELEC/TC 20 (European) and their subcommittees.

EPL/46 &#; Cables, wires and waveguides, radio frequency connectors and accessories for communication and signalling which is responsible for producing the British Standards covering cables having metallic conductors, wires, waveguides, r.f.connectors, and accessories for analogue and digital transmission systems and equipment for communication and signalling. 

Tratos UK Ltd has access to contribute to the important work of these technical committees, via membership of its trade body, the British Cable Association.

Cables manufactured in accordance with BS Standards are recognised and respected worldwide. Given below is an indicative range of the Electrotechnical British Standards (BS) for cables to which Tratos (UK) Ltd manufactures cables. 

Tratos also manufacture a comprehensive range of cable in accordance with other National and International cable standards which are available on request.

Note: one important, fundamental point to understand is that all Standards are purely voluntary they are not mandatory. In order for the requirements of a Standard to become mandatory, rather like the Highway Code, they must have this conferred upon them by legislation.

Some important and popular British Standards Cables (BS) are:

BS Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods

BS Electric cables. Specification for 300/500 V fire-resistant, screened, fixed installation cables having low emission of smoke and corrosive gases when affected by fire. Multicore cables

BS Electric cables. Specification for Thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1 000 V for fixed installations, having low emission of smoke and corrosive gases when affected by fire. 

Recommended article:
5 Reasons Flexible Metal Conduit is the Ultimate Water Proof Solution
Is Flexible Metal Conduit the Safest Choice for EU Buildings?
10 Questions You Should Know about Electrical Flexible Conduit Square-lock
Category 6 cable
Which Flexible Metal Conduit Low Fire Hazard EU: The Ultimate Safe Solution for Electrical Wiring?
The Ultimate Guide to Metallic Fittings UL
Exploring the Benefits of Using Silicone Jacketed Tube

For more information, please visit Mingda.

BS LV and MV polymeric insulated cables for use by distribution and generation utilities.

BS  Method for assessment of fire integrity of large diameter power cables for use as components for smoke and heat control systems and certain other active fire safety systems.

BS &#; Electric cables. Single core PVC insulated flexible cables of rated voltage 600/ V for switchgear and controlgear wiring

BS  &#; Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV &#; Requirements and test methods

BS &#; Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods.

 BS &#; Electric cables. Thermosetting insulated and thermoplastic sheathed cables for voltages up to and including 450/750 V for electric power and lighting and having low emission of smoke and corrosive gases when affected by fire.

BS  &#; Electric cables. Thermosetting insulated, non-armoured cables with a voltage of 600/1 000V, for fixed installations, having low emissions of smoke and corrosive gases when affected by fire.

BS IEC   &#; Submarine power cables with extruded insulation and their accessories for rated voltages from 6 kV (Um = 7,2 kV) up to 60 kV (Um = 72,5 kV). Test methods and requirements.

BS Flexible cables for use at mines and quarries

BS Electric cables. Thermosetting insulated armoured cables of rated voltages of 600/1 000 V and 1 900/3 300 V for fixed installations.

BS Electric cables. Thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1 900/3 300 V for fixed installations, having low emission of smoke and corrosive gases when affected by fire.

Are you interested in learning more about BS Standard Cable? Contact us today to secure an expert consultation!