Shafts: trimming, sleeve installation

Cookie, you will love doing this. I didn't do my 910 because I hadn't messed with the adapters yet. But a few years ago, I did build my old man a driver and it was a pretty fun process to go through. A Dremel would probably work just fine to cut the graphite, but if you don't have access to one, a hacksaw with a fine tooth blade will be fine. Just wrap where you are cutting in a few wraps of masking tape. That guards against fraying the graphite fibers when you are cutting. That's how I have always done it and I only use the Dremel to cut steel shafts. A fine grit sand paper will be all you need to prep the tip. Something to rough up the tip so the epoxy gets a better bond. The biggest problem I ever have is setting the ferrule at the correct depth. But The Golfworks has a handy little tool to help with this, I have just yet to invest in one. Once you do one, you will wonder why the hell you ever paid anyone to do this.

If you want to learn more, please visit our website.

We supply

mechanical seals, shaft sleeve, oil seal, stuffing box, pump casing, impellers etc. pump parts

Its sleeves are made of stainless steel and are designed to protect the shaft from abrasive fluids.
It has two types: stainless steel and stainless steel with ceramic coating.
The sleeves with ceramic coating have longer service time and very good quality

SUNBO PUMP contains other products and information you need, so please check it out.

CERAMIC COATED SHAFT SLEEVE

OEM#: P25SHSLVC, 7A-250-SSC, , , -002, 11-250SBPG,, H-21G-7A

STAINLESS STEEL SHAFT SLEEVE

OEM #: MISSION -21,

Mechanical seal Dimensions :

3.5inch, 2.5 inch, 1.875 inch and 1.5 inch

For more Ceramic Shaft Sleeveinformation, please contact us. We will provide professional answers.

Description

• CERAMIC COATED SHAFT SLEEVE
• KIT - MISSION MAGNUM, SUPREME & SANDMASTER
• 2.000 X 2.500 X 4.120
• OEM #: MISSION -21G-7A
• BRAND PART NUMBER MCM P25SHSLVC Mission® -21G-7A Mattco® -002 Harrisburg® 7A-250-SSC DL SDS MUD HOG® Halco H-21G-7A