Stainless Steel Band Repair Clamp

Description

If you want to learn more, please visit our website.

Stainless Steel Band Repair Clamp is suitable for repairing pin holes and breaks caused by aging or rusting,which can seal under pressure without changing pipes.This kind of repair clamps have advantage of safe,convenient and efficientcy. It can be installed without any special tools.It is highly optimized for general use and has few requirements on the elipticity of pipe arc.

Drawing

Specification

No.Part NameMaterial1Junction PlateStainless Steel2LugsStainless Steel3Locking PlateStainless Steel4WasherStainless Steel5NutStainless Steel6Protection CapPlastic7SkinStainless Steel8Sealing RubberEPDM/NBR

Packing and Label

Installation Procedure

Step 1: preparation for the Repair Clamp Installation

Step 2: wrap the clamp around the pipe,take note to make the overlap of the rubber away from the leak point.

Step 3: assemble the clamp around the pipe by bringing the lockplate over the alignment lgus and hand tightening the nuts to hold it in place.

Step4: use a tension wrench to sequentially tighten the studs to the recommended tension specified on the clamp

Step5: installation finished.

Features

1.Quick Installation

Solid supply professional and honest service.

2.Anti-Corrosive

3.Wide Range O.D Tolerance

4.Light-Weight, Portable

5.Easy Handle

6.Labor-Saving

7.Money-Saving

FAQ

Q: How to choose suitable stainless steel repair clamps ?

A: You should provide the information including your pipe material, pipe O.D, pipe medium and medium temperature .and then will choose suitable models for you based on your above information .

Q: How to choose between single-band and double-band ?

A: You are recommended to choose double-band for the pipeline with the diameter above DN350mm. You are recommended to choose single-band for the pipeline with diameter below DN300mm .The pressure resistance performance of double-band repair clamps is better than single-band for the same size .

Q&#;What about your warranty period ? Can I return goods to you if we are not satisfied ?
A&#;We provide one year warranty for the quality of our products .Repair Clamps should be fixed on the pipeline as per our video installation instruction. No responsibility will be taken for damage due to incorrect installation. Returns will be only accepted only if our product provde to be defective .